基于线状特性的大数据地铁用户识别与定位方法

从MR原始数据特性出发研究数据结构与字段,采用基于线状特性分析MR大数据的地铁用户识别过滤方法和位置定位方法,该方法经过验证能够有效输出地铁用户数据并定位在地图上,解决人工地铁测试效率低且测试片面的问题,实现基于大数据的自动化地铁网络评估,提供海量的有效定位数据用于地铁评估与分析。     

Moving beyond ‘more crop per drop’: insights from two decades of research on agricultural water productivity

ABSTRACT

Concern over increasing water scarcity has led to the introduction of the concept of agricultural water productivity and an emphasis on interventions to achieve ‘more crop per drop’. Yet, a strong debate continues on how the concept is to be defined and used. Drawing largely from the irrigation literature, the origins of the concept and its methodological developments are reviewed, and its use in applied work over two decades is discussed. Based on this analysis of conceptual and applied research, key insights into the concept’s contributions and limitations are presented, as well as opportunities for further refinements.     

基于人体关节点数据的攻击性行为识别

针对人体攻击性行为识别问题，提出一种基于人体关节点数据的攻击性行为识别方法。首先，利用OpenPose获得单帧图像中的人体关节点数据，并通过最近邻帧特征加权法和分段多项式回归完成由人体自遮挡和环境因素所导致缺失值的补全；然后，对每个人体定义动态"安全距离"阈值，如果两人真实距离小于阈值，则构建行为特征矢量，其中包括帧间人体重心位移、人体关节旋转角角速度和发生交互时的最小攻击距离等；最后，提出改进的LightGBM算法w-LightGBM，并对攻击性行为进行识别。采用公共数据集UT-interaction对所提出的攻击性行为分类识别方法进行测试实验，准确率达到95.45%。实验结果表明，所提方法能够有效识别各种角度的攻击性行为。     

MooseFS热备元数据节点设计与实现

针对MooseFS元数据节点的单点故障问题，对MooseFS源码进行改造，为其增加一个热备的备元数据节点，并通过主备之间同步元数据，备节点回放操作日志等技术使得备元数据节点内存中的元数据时刻跟主元数据节点保持一致。当主元数据节点发生故障切换到备元数据节点后，备元数据节点无需从本地加载元数据即可快速接替主元数据节点对外提供服务。测试结果表明，备元数据节点本地和内存中的元数据均与主元数据节点保持一致，且故障恢复时间小于1 s。     

Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

加强自然资源领域安全生产管理措施建议研究

当前，安全生产事故频发，造成重大人员伤亡和财产损失，成为国家安全生产亟需解决的问题，按照新时期新要求，加强自然资源领域安全生产管理尤为重要。本文重点围绕自然资源领域涉及的土地资源、矿产资源、海洋资源以及测绘行业和地勘行业，通过调研及专家座谈，分析了我国自然资源领域安全生产管理的现状，存在的问题和产生的原因；结合新时期自然资源管理实际，以及地方和其他部门典型经验，从制度机制、标准化、信息化、人才培养等角度提出了加强我国自然资源领域安全生产管理的措施和建议，以供参考。     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

Digital twin-based assembly data management and process traceability for complex products

Complex products such as satellites, missiles, and aircraft typically have demanding requirements for dynamic data management and process traceability. The assembly process for these complex products involves high complexity, strong dynamics, many uncertainties, and frequent rework and repair, especially in the model development stage. Achieving assembly data management and process traceability for complex products has always been a challenge. A recently proposed solution involves one-to-one mapping of the corresponding physical entity, also known as the digital twin method. This paper proposes a digital twin-based assembly data management and process traceability approach for complex products. First, the dynamic evolutionary process of complex product assembly data was analyzed from three dimensions: granularity, period and version. Then, a framework of digital twin-based assembly data management and process traceability for complex products was constructed. Some core techniques are: 1) workflow-based product assembly data organization and version management; 2) synchronous modeling of the product assembly process based on digital twin; and 3) hierarchical management and traceability of product assembly data based on digital twin. On this basis, an algorithm flowchart for generating a product assembly data package was created, which includes product assembly data management, assembly process traceability, and generation of a product assembly data package. Furthermore, the Digital Twin-based Assembly Process Management and Control System (DT-APMCS) was designed to verify the efficiency of the proposed approach. Some aerospace-related assembly enterprises are currently using DT-APMCS and achieving satisfactory results. Finally, a summary of our work is given, and the future research work is also discussed.